• Announcements

    • Jim Hetchler

      Subaru-32000-39999-key-codes   11/18/2016

      Would all please help Genericode with this code series?  Go to "Information and Techiques" Forum and look at the Pinned subject to respond.  

About KeyPro

This area contains information for Automotive Locksmiths about qualifying for membership of KeyPro.

  • Forum Statistics

    • Total Topics
      41,235
    • Total Posts
      336,837
  • Topics

  • Posts

    • Happy Inauguration Day everyone! “Free at last, Free at last, Thank God almighty we are free at last!”
                                                                                                    ~MLK
    • Very good! 2nd key must've closed it out by cycling it off and back on again. Sort of like with Nissan or Toyota Lexus, once the security light goes solid cycle in your keys first and foremost then check your programmer that all is well. With VW/Audi the security light stops flashing then the first key is programned, cycle in any others and watch the security light flash and extinguish. I always end using the first key (Nissan requirement) and then try each one.
    • Thanks Chris!!!  I tried it again today.  Same thing, it said one key programmed.  Told it to program 2.  Left the first key in until the light flashed, and then went out.  SKP screen changed to ask if a key started the car.  I didn't touch the SKP, I just turned the ignition switch off, held the second chip up to the antenna ring.  Turned on the ignition again, watched the light flash, and then go out.  Turned the ignition back on, theft light went out, and engine started!  Hit yes on the SKP, then disconnected.  Tested both keys, and both worked, both made the theft light go out.  I didn't cycle key #1 back in to close the learning cycle, I'm assuming telling SKP yes closed the cycle.  I've updated the collaborated manual. Thanks again guys!!!
    • Abrites Diagnostics for Mitsubishi version 3.1  Published: 18 January 2017     The new version of the Abrites diagnostics for Mitsubishi includes improvements and new features in the following: 1. Key learning enhanced with the following sub-functions: 1.1.Key Registration (by Bar-code Number). This feature allows you to register a key based on the bar code number from the key (free for all customers with a valid AMS and MI006) 1.2.Key code registration to Engine / Key code and Chassis Number(VIN) registration to Engine (free for all customers with a valid AMS and MI006) 1.3.Master key search (free for all customers with a valid AMS and MI006) 1.4.Remote Control Reception Check (Checking if the car can receive the signal from the remote) (free for all customers with a valid AMS and MI006) 1.5. PIN code (default value) automatic setting. (free for all customers with a valid AMS and MI006) 2. Added special function "DPF regeneration" (free for all customers with a valid AMS) 3. Standard diagnosis functions (Read/Clear DTCs, Freeze frama data, Actual values, Actuator tests) support for all units for all models MY2006+. (free for all customers with a valid AMS) Please expect the update after January 21st. Abrites Diagnostics for BMW generation 2 version 30.6  Published: 18 January 2017     The news in version 30.6 of the Abrites Diagnostics for BMW generation 2 is that now you can program keys and transponders for CAS 2 for the 7942/7944 transponder types. This function is available with both TAG programmer and PROTAG. This functionality will be available to all customers who have BN010 and a valid AMS. Please expect the update after January 21st.
    • Abrites Diagnostics for Nissan/ Infiniti 5.6  Published: 17 January 2017     The update for the Abrites diagnostics for Nissan Infiniti might not seem that big on first glance but once you look into it you will realise just how many
      new opporunitues you will have using it. We now have the ability to calculate a PIN code by the by ICU or SEC label numbers. This means that there will be
      a much greater coverage and, of course, a backup option for PIN code extraction. Free for all customers with NN006 and a valid AMS. Customers with valid AMS should expect their update links after January 21st 2017 Abrites Diagnostics for Fiat/ Lancia/ Alfa Romeo/ FCA version 6.8  Published: 17 January 2017     The new version of the Abrites Diagnostics for Fiat/ Lancia/ Alfa Romeo/ FCA has received multiple updates and optimisations.
      Some of the most prominent features of this update are:
      - Reading, writing Conf Data and making virgin of the Magneti Marelli 9GF. This functionality will be free for all owners of FN015 and a valid AMS.
      - Another useful feature will be the ability for programming of the Chrysler WCM (Wireless Control Module) to a vehicle. Free for all customers with a valid AMS. Customers with valid AMS should expect their update links after January 21st 2017
  • Links