.png.445c22bcdcbbedce08191329b9fb30c3.png.0de6decbde4e9b50634d56e4632862f1.png.18b4f695eaf81638e0a7fe9df191dbd3.png){kind=logo}
Saltydog
-
Posts
269 -
Joined
-
Last visited
Reputation Activity
-
Saltydog reacted to Jim Hetchler in 2016 Mini-Cooper Programming in 5 parts by Stacy
Here is a five part video making a prox for this Mini Cooper from start to finish. We hope you enjoy and this helps you. Jim and Stacy.
Clicking the link will or should download it to your computer.
2016 Mini-Cooper programming part 4.avi 2016 Mini-Cooper programming part 5.avi 2016 Mini-Cooper programming part 1.avi 2016 Mini-Cooper programming part 2.avi 2016 Mini-Cooper programming part 3.avi -
Saltydog reacted to Keyhole - Eugene in 2008+ Ford Super Duty Dash Cluster
FYI on these, 2 experiences both identical with Fleet trucks.
Both vehicles F350, NON transponder.
Customer ordered a re manufactured dash from Local ford dealer.
Dash shows up, they install will not start. Blinking theft light. Mileage, VIN etc are all already set and on a sticker on the side of the refurb clusters
What does NOT work to get these running
Programmable module installation - Copies data from old to new (I think?) acts exactly the same
Parameter reset - nope
Attempting to program transponder keys and just making it a transp car - nope
What does work -
Take out the APP, mileage adjustment, and just set the mileage right back to what it already had. Fired right up with the non transponder keys.
Not sure if the parameter reset was required or not - did them anyways prior on the second one.
Hopefully that saves someone some time.... the dash's ford is sending must all have the PATS enabled and for what ever reason setting the mileage while plugged into the vehicle seems to be turning it off.
-
Saltydog reacted to Lockin4u in 2002 Jeep Grand Cherokee Type 2 Immobilizer & PCM Swap
I'll just drop this here.
2002 Jeep Grand Cherokee Type 2 Immobilizer & PCM Swap.pdf
-
Saltydog reacted to rapidlock in 2014 Dodge Ram PCM replacement with Autel
I did a PCM replacement on a 2014 Ram with my Autel today. It was a used PCM and the procedure was a little different that the Caravan that I posted about last month. This one actually had fewer steps.
In Autel select your vehicle and then go to: Diagnostics>Control Unit>Engine>Check PCM VIN
At this point it will read the VIN in the PCM and give you an option to update it. After you update the PCM, go to "Reset ECU". Then auto scan for, and then clear codes, and you're go to go. You don't even need the PIN to change the PCM on this vehicle.
