[2008 Mini Coopers PCM swap]

Just now, Keyhole - Eugene said:

 

Clone it if it will read on the bench

 

Various ways of getting that done at this point , but essentially try to read and save all file formats available on the applicable DME, Write said files to used donor. Typically done at that point.

Not all DME can be easily read however, it varies pretty vastly depending on which ecu you have.

But essentially the ISN needs to match the cas for the vehicle to run. If for some reason you cannot edit or clone the DME, you could always modify the CAS to match the DME

VIN I'm not 100% sure on, but I think it will throw codes if it doesnt match 

 

 

What ECU is in the car?

Problem is I can't read the original dme at all

[2008 Mini Coopers PCM swap]

I have a dme out of a mini R56 that won't communicate at all. I have a donor that I want to program what's the best way to go about it.

[Mercedes transmission]

4 minutes ago, autokeypro said:

Vvdi mb to Virginize on bench

Im608 to code it obd

 

 

 

 

 

Does vvdi mb require a token? Do you have a link for the cable to connect to the transmission? 

[Mercedes transmission]

On 10/29/2020 at 3:10 PM, Goalie309 said:

I had a customer call with a 2013 GLK350 that they put a used trans in and wondered if I could program it as it wouldn't move. I have diagspeed pro so I was able to reset it and I used autel elite to code the trans when all said and done car moved.   Easy money. Dealer wanted 11k.  They have less than 3k in I would bet

Did you have to use a special adapter to plug directly into the transmission computer?

I have 2011 Mercedes that needs transmission programmed. I have autel im608 abrites and vvdi MB.

[I/O terminal]

On 7/30/2020 at 8:34 PM, Goalie309 said:

I used my tool for the first time and successfully swapped TCM on a 15 traverse with no sps.  This tool is great

Can you explain exactly what you had to do to accomplish this job?

[2017 Ram Promaster]

Shop installed brand new PCM. Micropod required to program. Most Chrysler vehicles have an option to replace PCM under the BCM. This vehicle does not have that option. You need to select PCM from the topology then update the flash after which you need to update the odometer and then the pcm vin.